Fein Multimaster saw blades

[Dana Decker]

I put off buying a Fein Multimaster for a long time because of the cost of saw blades. I learned how to make some cheap and thought I would share. Hope yall will enjoy

http://home.comcast.net/~dldecker/fein.html (http://home.comcast.net/%7Edldecker/fein.html)

[Eddie Watkins]

Great idea, Dana. I'll have to try that.

Eddie

[Dale Lesak]

find a feather edge file and recut your own teeth. I've been doing this for years. I use tin snips to cut the blade (Pull saw blade) and on the real thin blades I solder a washer around the hole for better holding power. also a good putty knife works for making your own scrapers. I bought a "Good" drill bit from Ace Hardware (The one that will drill through a file (Argues SP) and it'll go right through the tempered steel. :)

[Tyler Howell]

Thanks Dana,
They are pricy.
Good idea

[Greg Sznajdruk]

This is the only downfall of this tool, the cost of blades.

Greg