View Full Version : Experience with or opinion of LV router table insert?
Phil Dalton
08-30-2007, 10:06 PM
Has anyone had any experience with this Lee Valley router table insert? I would also be interested in opinions as to how well it would serve.
http://www.leevalley.com/wood/page.a...000,51208&ap=1
Thanks,
Phil
Tony Shaftel
08-30-2007, 11:51 PM
Do you mean this one?
http://www.leevalley.com/wood/page.aspx?c=2&cat=1,43053&p=50264
I don't have it but I have their router table system which uses the same inserts and method of holding the router. It is very well made and works beautifully.
Tony
Phil Dalton
08-31-2007, 7:07 AM
Sorry about the bad link. Let me try again. I am talking about this insert which is a different one. Tony, thanks for the information about the table and the problem with the link.
http://www.leevalley.com/wood/page.aspx?c=2&p=41776&cat=1,43000,51208&ap=1
Keith Carscadden
08-31-2007, 8:34 PM
I've been using that base plate for several years. It works OK, and the included instructions are very good. You'll need access to a drill press to get the holes correct for attaching your router.
Keith
Phil Dalton
08-31-2007, 9:29 PM
Thanks, Keith. I have a klunky drill press so I will hopefully be able to get the holes in. It is good to know the design works. The idea is appealing, especially cost-wise.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.