Craig D Peltier
08-25-2007, 10:41 AM
Hi this is my first one. Took alot of thinking about how it will all tie in, for me anyways.
I had it painted by someone with a sprayer and I did the rest. The lower two draws have locks and file folder holders I made legal size. I used aluminum 1/8 by 3/4 bar stock with some wood blocks with rabbetts cut into them. It my first time installing pocket doors and a keyboard slide as well.They both were pretty easy.
The wall and ceiling were off a quite a bit in this house.
Top is solid poplar as are draw carcasses.The rest is edge banded birch and a low end birch ply I think some refer to it as sand ply.
Thanks for looking,thansk for all the help from the kind folks on here, any critiscm welcome.
Today im putting in a Cherry one that I dissected the heart of it and reconfigured it to fit a 55 inch Plasma.
70558
70559
I had it painted by someone with a sprayer and I did the rest. The lower two draws have locks and file folder holders I made legal size. I used aluminum 1/8 by 3/4 bar stock with some wood blocks with rabbetts cut into them. It my first time installing pocket doors and a keyboard slide as well.They both were pretty easy.
The wall and ceiling were off a quite a bit in this house.
Top is solid poplar as are draw carcasses.The rest is edge banded birch and a low end birch ply I think some refer to it as sand ply.
Thanks for looking,thansk for all the help from the kind folks on here, any critiscm welcome.
Today im putting in a Cherry one that I dissected the heart of it and reconfigured it to fit a 55 inch Plasma.
70558
70559