View Full Version : Exit signs
Wil Lambert
08-24-2007, 7:30 AM
I am looking for a material to remake a lighted exit sign from. The base has to be a translucent white an I need red lettering. I was thinking of making it out of acrylic with vinyl. Any other ideas? Made a 2 layer Rowmark product of something similar?
Thanks,
Wil
Mike Null
08-24-2007, 7:34 AM
You might consider reverse engraved white Rowmark with a red color fill. This material has a clear/matt core with a white painted back which you engrave and fill.
Joe Pelonio
08-24-2007, 8:18 AM
I do them with translucent white acrylic and translucent vinyl lettering. If you wanted to do all laser you could cut /18" translucent red acrylic letters and glue them onto the white.
Darren Null
08-24-2007, 9:06 AM
3D engrave the perspex and edge-light with red LED or cold cathode?
Wil Lambert
08-25-2007, 9:03 AM
Thanks for all the suggestions. I ended up going with 2 different colors of acrylic and gluing them together. Wil
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.