Jim Healy
08-21-2007, 5:50 PM
Epilog 120 Watt Laser - $30,000 this machine was purchased new in 2003, I have less than 150 hours on this machine. You can cut or engrave many materials. Epilog is currently listing a similar used machine on their website, this machine is 75 watts and is listed for $29,995. http://www.epiloglaser.com/preowned.htm (http://www.epiloglaser.com/preowned.htm) My machine has almost twice the power of their laser at the same cost. This machine is in perfect condition. You will easily spend more than $45,000 for a similiar new machine today. I will gladly demonstrate. You will not find a better laser or value, anywhere. Included within this sale is the following accessories.
Split Beam Accessory - this will double the productivity by performing 2 operations simultaneausly, the beam splitter has a focal length of 2.0 inches and is used in conjunction with standard 2.0 inch lens
Rotate Accessory - using this tool you can perform laser engraving or cutting on clyindrical objects i.e. glasses, bottles, flashlights, etc..
Vector Grid - 32 inch, used for cutting
2.5 inch lens
2.0 inch lens (standard Lens)
Small compressor that is used for blowing debris during the lasering opertion.
Large 1 HP. blower/vacuume for machine ventilation.
Legend 32EX Technical Specifications
- Max Engraving Area 32" x 20" (812 x 508 mm)
- Max Material Thickness 9" (228 mm)
- Table Size 37" x 21" (940 x 533 mm)
- Laser Control Display Panel 4" x 3" LCD displays job graphic, stored file names, speed, power, run time, and more. Drop-down menus provide user control of all laser settings, calibration, and special features.
- Intelligent Memory Buffer Store unlimited files up to 32 MB. Rolling buffer allows files of any size (32 MB and larger) to be engraved.
- Operating Modes Optimized raster engraving, vector cutting or combined raster/vector mode.
- Motion Control System High-speed, continuous-loop, DC servo motors using linear encoding technology for precise positioning.
- Laser Source State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
- X-Axis Bearings Ground and polished stainless steel NeverWear™ Bearing system.
- Belts Advanced B-Style doublewide Kevlar precision drive belts.
- Resolution User controlled from 150 to 1200 dpi.
- Speed and Power Controls Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed and power settings to any RGB color.
- Print Interface 10 Base T Ethernet or Parallel connection. Compatible with Windows XP/2000.
- Size and Weight 42" wide x 32.5" deep x 42" high (1067 x 826 x 1067 mm) 375 lbs (172 kg) - 120 watt cabinet is 34.5" deep (876 mm)
- Standard Features Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2" focus lens, relocatable home, flash upgrade electronics.
- Electrical Requirements Auto-switching power supply accommodates 110 to 240 volt, 50 or 60 Hz, single phase, 15 amp AC.
- Ventilation System External exhaust to the outside required. Output diameter at machine is 6".
- Safety CDRH Class IIIa
Split Beam Accessory - this will double the productivity by performing 2 operations simultaneausly, the beam splitter has a focal length of 2.0 inches and is used in conjunction with standard 2.0 inch lens
Rotate Accessory - using this tool you can perform laser engraving or cutting on clyindrical objects i.e. glasses, bottles, flashlights, etc..
Vector Grid - 32 inch, used for cutting
2.5 inch lens
2.0 inch lens (standard Lens)
Small compressor that is used for blowing debris during the lasering opertion.
Large 1 HP. blower/vacuume for machine ventilation.
Legend 32EX Technical Specifications
- Max Engraving Area 32" x 20" (812 x 508 mm)
- Max Material Thickness 9" (228 mm)
- Table Size 37" x 21" (940 x 533 mm)
- Laser Control Display Panel 4" x 3" LCD displays job graphic, stored file names, speed, power, run time, and more. Drop-down menus provide user control of all laser settings, calibration, and special features.
- Intelligent Memory Buffer Store unlimited files up to 32 MB. Rolling buffer allows files of any size (32 MB and larger) to be engraved.
- Operating Modes Optimized raster engraving, vector cutting or combined raster/vector mode.
- Motion Control System High-speed, continuous-loop, DC servo motors using linear encoding technology for precise positioning.
- Laser Source State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
- X-Axis Bearings Ground and polished stainless steel NeverWear™ Bearing system.
- Belts Advanced B-Style doublewide Kevlar precision drive belts.
- Resolution User controlled from 150 to 1200 dpi.
- Speed and Power Controls Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed and power settings to any RGB color.
- Print Interface 10 Base T Ethernet or Parallel connection. Compatible with Windows XP/2000.
- Size and Weight 42" wide x 32.5" deep x 42" high (1067 x 826 x 1067 mm) 375 lbs (172 kg) - 120 watt cabinet is 34.5" deep (876 mm)
- Standard Features Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2" focus lens, relocatable home, flash upgrade electronics.
- Electrical Requirements Auto-switching power supply accommodates 110 to 240 volt, 50 or 60 Hz, single phase, 15 amp AC.
- Ventilation System External exhaust to the outside required. Output diameter at machine is 6".
- Safety CDRH Class IIIa