Nazmy Wasfy
08-15-2007, 10:22 PM
Hi Everybody,
I joined Sawmill Creek just recently but I've been logging in as a guest for quite sometime.
You guys are awesome at helping each other and exchanging your experience..
I have just bought an Accuris PowerSharp 16 (30W) about a month ago. I have tested the machine with small text jobs with no glitches; however when I tried to run a job with text and a graphic picture (that I had converted to a 1Bit bmp), I got an error message on the LCD panel: "BAD (Length) 1.78MB"
I made several attempts with either smaller or larger files; some were accepted and others gave me the same error (different MB).
It seems the machine developed a mind of its own accepting some files and refusing others!!
I tried changing the parallel cable, rebooting both the machine and the computer; but this didn't resolve the issue...
I wonder if anyone had experienced such problem before.. I would welcome all the help I can get to get back on track.
Thanks, Nazmy
I joined Sawmill Creek just recently but I've been logging in as a guest for quite sometime.
You guys are awesome at helping each other and exchanging your experience..
I have just bought an Accuris PowerSharp 16 (30W) about a month ago. I have tested the machine with small text jobs with no glitches; however when I tried to run a job with text and a graphic picture (that I had converted to a 1Bit bmp), I got an error message on the LCD panel: "BAD (Length) 1.78MB"
I made several attempts with either smaller or larger files; some were accepted and others gave me the same error (different MB).
It seems the machine developed a mind of its own accepting some files and refusing others!!
I tried changing the parallel cable, rebooting both the machine and the computer; but this didn't resolve the issue...
I wonder if anyone had experienced such problem before.. I would welcome all the help I can get to get back on track.
Thanks, Nazmy