View Full Version : Table saw sled for miter cuts ?
simo sentissi
08-15-2007, 2:12 PM
Hey there
I once saw a contractor that had a sled with a setup in it that allowed him to add a trigle in order to make miters on the ts.
I am trying to think of how I can add that to the sled..... anybody has some pictures or plans ?
also is it even worth it ? I have a really whimpy miter g with my hitachi portable ts....
Thanks in advance
Alex Berkovsky
08-15-2007, 4:10 PM
Hey there
I once saw a contractor that had a sled with a setup in it that allowed him to add a trigle in order to make miters on the ts.How can one be sure that the triangle being used is a perfect 45° angle? Why not just build a miter sled? Here's one that I built from ShopNotes plans:
http://www.sawmillcreek.org/showthread.php?t=48667
Mark Singer
08-15-2007, 4:20 PM
Here is a pic of my miter sled
http://www.sawmillcreek.org/attachment.php?attachmentid=68612
Guy Germaine
08-16-2007, 6:25 AM
Here's mine. Nothing fancy, but it gets the job done.
http://www.fototime.com/3F0BA2B1AAC4274/standard.jpg
Henk Marais
08-16-2007, 6:59 AM
Here's mine. Nothing fancy, but it gets the job done.
Guy the paterns on that jig's ply is better looking than some of the furniture in my house.
simo sentissi
08-16-2007, 2:15 PM
I guess I will have to build one just for the mites cut.
while I am at it I might ever do one for dado cuts as well
Guy Germaine
08-17-2007, 7:21 AM
That is a nice piece of plywood, isn't it? :D
I happened to find that at the BORG. I bought some plywood for a bookcase and that's what I found. Two full sheets looked like that!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.