View Full Version : Finish for Kitchen Cabinets Gloss, Semi or Satin
Michael Disorbo
08-07-2007, 4:35 PM
Hi folks,
Was wondering what most use for kitchen cabinet clear top coat finishes. High Gloss, semi gloss or satin? I am thinking Taget USL but wanted to know what most use a far as the shine goes. Thanks!!!
Mike
Steve Clardy
08-07-2007, 5:24 PM
I use all satin.:)
I don't like the high gloss look.
Jeff Wright
08-07-2007, 9:46 PM
Satin. In my view, most shiny finishes cheapen the look. Plus, the reflective glare on shiny surfaces can get annoying.
Ron Jones near Indy
08-07-2007, 9:53 PM
Satin here too. A high gloss look reminds me of a cheap plastic product. JMHO.
Steve Schoene
08-07-2007, 11:02 PM
The kitchen designer working on my house says almost all of the high end cabinets he sells have a 15 gloss number, which is pretty much on the low end of satin, not quite flat.
Tim Sproul
08-08-2007, 11:57 AM
high gloss quickly looks bad...
Areas that receive a lot of traffic - close proximity to door handles and cabinets near sinks and stoves that cleaned/wiped down more often - quickly become satin or matte.
Phil Phelps
08-08-2007, 12:28 PM
the piano. Benjamin Moore low luster oil enamel.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.