Coming from Wixey in about 60 days.

[Bill Huber]

I wrote an email to Wixey about a height gauge and got back a very nice reply and an image of what will be out in about 60 days.
It lays flat on the table if you notice so it will be great for setting my router fence to bit spacing.

Here it is and it looks like it will be a nice addition to their line of products.


68988

[Don Taylor]

Thanks Bill, I'll be looking at this one!

DT

[Bob Wingard]

That's REALLY nice, but I think I'll stay with this one that I built a few years ago .. .. ..


http://webpages.charter.net/bob_wingard

[Scott Coffelt]

Thansk for the heads up. I really like their stuff. I've had the planer gauge for awhile and recently got the angle gauge. Finally pulled that out of the package this weekend (not sure what took me so long). Anyways, my TS and CMS were both about .2 -.3 out of align. Not now.

[Noel Hegan]

That's REALLY nice, but I think I'll stay with this one that I built a few years ago .. .. ..


http://webpages.charter.net/bob_wingard

Bob, nice gauge. How did you attach the right angle to the body?

[Bob Wingard]

Drilled, tapped, & countersunk from the bottom.