View Full Version : Laserable reflective tape?
Allan Wright
07-23-2007, 8:28 AM
Does anyone know of a source for laserable reflective tape in 2-4" widths?
Joe Pelonio
07-23-2007, 9:41 AM
Grainger has the tape, you'd have to check the msds at the store to see if it contains PVC. I have cut others that were poly based like Arlon but it only comes 15", 24" and 30" (normally use a plotter to cut it).
This one is also poly based:
http://www.tapetechnologies.com/reflect_msds.html
Larry Bratton
07-24-2007, 10:02 PM
Does anyone know of a source for laserable reflective tape in 2-4" widths?
Just a thought..Tape Technologies makes an engineering grade reflective material for using on street signs and the like. It is polyester based so I think you could cut it with your laser with no problems. It has adhesive applied and comes in various colors.
http://www.tapetechnologies.com/reflective.html
Product Description: A polyester or acrylic film with a permanent adhesive on a paper release liner. (From the MSDS)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.