Grady Cowardin
07-12-2007, 3:49 PM
Instead of buying a 1/4" collet I can get an extension for use in a 1/2" router that holds 1/4" shanks for $5 more. MLCS has both the 1/2" and 1/4" Extensions as a package for $40, not a bad deal or one for $25. I know extending the distance away from the motor shaft adds torque to the router's output shaft/bearings etc but what about the possible extra vibration added? What are the disadvantages to these extensions? I am sure they are safer than not seating the bit completely in the collet to gain extra height but I've never used one so please fill me in.
If I order from them I may also pick up a Dovetail bit set. They sell a standard 14 degree kit but it doesn't include and straight bits. There is also an Incra kit that includes the straights but they are odd angles and I assume you need their templates etc. Trying to avoid buying crappy bits off ebay so bare with me here. Thanks!
If I order from them I may also pick up a Dovetail bit set. They sell a standard 14 degree kit but it doesn't include and straight bits. There is also an Incra kit that includes the straights but they are odd angles and I assume you need their templates etc. Trying to avoid buying crappy bits off ebay so bare with me here. Thanks!