Vacuum Chuck for a Jet 1442

[Jeff Paxton]

Can anyone give me some advice for a vacuum chuck for a Jet 1442? I saw one at Packard's called "Holdfast" for $249. Would this one work on my lathe or is there something that might be better. I do have a compressor, but am not real adept at building equipment. Any help would be appreciated.

Jeff

[Christopher K. Hartley]

Sounds like you may need the whole vacuum setup not just the chuck. Is that correct?:confused:

[Jeff Paxton]

Yes, I would be looking at getting a complete setup, but really didn't know what all I would need, and what would work on my lathe.

[Stuart Johnson]

It sounds like you are looking at the Hold Fast vacuum system that uses a compressor instead of a vacuum pump.

I have a Nova 3K and have gone with an E-Z Vacuum Adaptor from Packards part number 111210. Surplus vacuum pumps can be had for less than $100. My vacuum drum (chuck) is MDF with 4" pvc epoxyed on. I doubt if I have $200 total in the set up including piping.

Take a look at this link: scroll down to vacuum chuck construction.

[Stuart Johnson]

It sounds like you are looking at the Hold Fast vacuum system that uses a compressor instead of a vacuum pump.

I have a Nova 3K and have gone with an E-Z Vacuum Adaptor from Packards part number 111210. Surplus vacuum pumps can be had for less than $100. My vacuum drum (chuck) is MDF with 4" pvc epoxyed on. I doubt if I have $200 total in the set up including piping.

Take a look at this link: scroll down to vacuum chuck construction.
http://www.woodturners.org/tech_tips/frame_1.htm

[Christopher K. Hartley]

Here are a few links on her that may help you...
http://www.sawmillcreek.org/showthread.php?t=59939&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=59766&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=58309&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=56964&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=55809&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=56118&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=55720&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=55116&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=54948&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=54276&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=52424&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=52042&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=51167&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=51243&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=51216&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=49668&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=48060&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=47941&highlight=Vacuum
http://www.sawmillcreek.org/showthread.php?t=46592&highlight=Vacuum

[Jeff Paxton]

Thanks for all the help, and the links. I really appreciate it.

Jeff