Baltic Birch in DFW

[Cary Fleming]

Hi all,

Is there anyone in the Dallas/Fort Worth area that has found a good supplier of Baltic Birch plywood? Every place I've found that carries 5' x 5' sheets wants $20+ per sheet. I'm looking for someone offering it for $15 or less per sheet.

Thanks,
Cary Fleming

[Mike Null]

One of our members, Michael Kowalczyk, sells 1/8" BB from Houston. I have some and it cuts very nicely.

[Michael Kowalczyk]

He Mike,
Thanks for the plug. I have spoken with them. If anyone has been keeping an eye on Russian birch you may have noticed that that the supply has shrunk and the price has doubled. That's what happens when the tundra does not freeze;) . Well at least that's what my suppliers are telling me. I think it's a conspiracy to get the price up like oil. But if anyone else needs precut 3mm B/BB birch (ideal for Lazer Buzz products) go ahead and PM me.

Thanks

[Fred Craven]

Hi all,
Is there anyone in the Dallas/Fort Worth area that has found a good supplier of Baltic Birch plywood? Every place I've found that carries 5' x 5' sheets wants $20+ per sheet. I'm looking for someone offering it for $15 or less per sheet.


Just went through the search myself... GEE. I wish Baltic Birch could be found for 20.00 per sheet. That would be nice.:(

I finally found some at ACM: 1/2 Russian for about 34.00 sheet, 1/2 (from Finland) 4x4 for 36.00 and 8x4 Russian (with the grain going the other way) for 52.00.

That's the best I could find. ACM does not have any other sizes of Baltic Birch, but they have a lot of other interesting plywood available.

Chinese multi layered birch play is obviously cheeper.

They don't have a web site but their address is:
Architectural Carpentry Materials, Inc.
6025 Denton Dr
Dallas, TX 75235
(214) 350-1341

Hardwood Lumber Co. www.hlcdallas.com does have some 3/8th and 1/4 5x5 sheets, but I don't know the prices.

Fred
(not a laser engraver, but struggling with Baltic Birch just the same)

[Roy Brewer]

Is there anyone in the Dallas/Fort Worth area that has found a good supplier of Baltic Birch plywood? Cary,
Try the following; they are audio/video system manufacturers that do quite a bit of wood wholesale on the side.

BB, seems to me, is becoming like good, black, laserable marble. Is it possible that the number of laser owners have now surpassed the supply of this/these products?

Since I've only used scraps from the following supplier, I'd appreciate hearing what any of you learn from/about them:

Porter Falcon mailto:<porter@falconaudiovideo.com (<porter@falconaudiovideo.com)>
Laser Design Studio
Owasso, OK
(918)272-3969
(800)272-3969
(918)272-3390 FAX