Jeff Bower
06-22-2007, 3:55 PM
I have a homemade lathe and want to make a live center for. The tailstock is made from a long 1 X 8tpi threaded rod that is tapped for a 1/2 in bolt on the interior. Can you make a live center somehow with a bearing and a 1/2in bolt or a 1 in nut?
BTW...I'm not very mechanically inclined so the simplier the better....of course safety is important too.
BTW...I'm not very mechanically inclined so the simplier the better....of course safety is important too.