WoodMaster Drum Sander Owners

[Bruce Page]

I have a few questions…..:rolleyes:
I am this close (thumb & forefinger almost touching) to ordering their 2675, 26” Drum Sander.

• The Asian imports are a lot cheaper, are you still happy with your decision to go with the Woodmaster?

• Did you get the reversing switch upgrade? Was it necessary?

• Woodmaster sells infeed/outfeed table extensions, but when doing my homework, I never hear them mentioned. Did you get them, do you wish you had? Are they even necessary? They do look like they take up a lot of space.

• I will need a mobile base. Is the one offered any good, or should I look elsewhere? I would prefer a Delta foot lever style base if I could find one that would fit.

• What is the actual measurement of the machine base?

• I would like a bigger 3hp DC but I would be boarder line, juice-wise, with the DS & DC running at the same time. I do have the 1.5hp Delta 50-850 1200cfm, with 1 micron bags. Do you think it will have enough wheaties? It does a great job on my Delta 18/36.

• Do you get your paper from Woodmaster or have you found a better/cheaper source?

Thanks for any information that you can provide. The Woodmaster is a fair chunk of change for a hobby wood shop, but I’m trying to get all the expensive toys before I retire in a few years.:)

[Bob Kloes]

It is a great machine. I had a 37" double drum preformax. This is twice the machine that was. More power and smoother running. Skip the mobile base and make your own. Also don't have infeed and outfeed tables. No need . I have the reversing switch, don't really use it at all. I use a 2 horse dust collector, no problems.I will have to measure base . I guess all the stuff people write about the imports, they seem to all have problems. Just my thoughts. I like american made stuff. They will work out shipping for you also. Good customer service. I buy paper from Klingspor because I have an industrial account. Good paper from both. Good luck

[David Duke]

Bruce, while not a professional WWer I do have the 2675 Woodmaster sander and while not using it everyday I have used it quite a bit the past couple of years and have been very satisfied but I have never used any other drum sander before to compare it to.
I got lucky and bought mine used for a little less than 1/2 price and this included 7-8 rolls of paper of various grits from 60-220; I was going to buy one new but found one virtually like new just a couple of hours from me from an old man who was retiring and didn't have room in his home shop to keep it.
It didn't come with the reversing switch but after just using it a couple of hours I determined real quick that it would be something that would come in handy and got it, I was right because this allows you to make multiple passes with out walking from the in feed to the out feed sides and back.
I have the infeed/outfeed rolls but never put them on because of space constraints and really haven't seen a need.
Mine is stationary so can't comment on the mobile base.
I'm at work now and don't have the measurements of the machine, can get them this evening if you need it.
While I am using an Oneida 2hp DC, the gentleman I bought it from was using the Delta and said it worked fine.
Still using the paper that came with it.Hope this helps some as I said don't have much experience with drum sanders I have been extremely satisfied with the Woodmaster.

[David DeCristoforo]

I can "third" the above. I've had my 37" WM for about 7 years and I love it. In fact Woodmaster sends guys who live near enough to my shop to check out my machine before they buy. The reversing switch is virtually useless.

[Robert LaPlaca]

I have a few questions…..:rolleyes:
I am this close (thumb & forefinger almost touching) to ordering their 2675, 26” Drum Sander.

• The Asian imports are a lot cheaper, are you still happy with your decision to go with the Woodmaster?

Yes I am. It seems like folks either loved the Performax/Delta/Etc or hated them. I mostly use the machine to surface thin pieces and shop cut veneer.

• Did you get the reversing switch upgrade? Was it necessary?

I got the switch and have still not mounted it two years later, so my answer is no.

• Woodmaster sells infeed/outfeed table extensions, but when doing my homework, I never hear them mentioned. Did you get them, do you wish you had? Are they even necessary? They do look like they take up a lot of space.

I think if i had to choose between the reversing switch and the out/infeed tables I would pick the latter.

• I will need a mobile base. Is the one offered any good, or should I look elsewhere? I would prefer a Delta foot lever style base if I could find one that would fit.

I don't much care for the Shop Fox mobile base that Woodmaster sells for the machine, very hard to maneuver the machine. The wheels are of a very low quality.

• What is the actual measurement of the machine base?

37 1/4 * 22

• I would like a bigger 3hp DC but I would be boarder line, juice-wise, with the DS & DC running at the same time. I do have the 1.5hp Delta 50-850 1200cfm, with 1 micron bags. Do you think it will have enough wheaties? It does a great job on my Delta 18/36.

I have a 3hp collector with a 1 micron bag, seems to work OK, until I finally get the Oneida cyclone...

• Do you get your paper from Woodmaster or have you found a better/cheaper source?

Klingspor, they are local to me (NC) and they are great folks


Thanks for any information that you can provide. The Woodmaster is a fair chunk of change for a hobby wood shop, but I’m trying to get all the expensive toys before I retire in a few years.:)

If I had the opportunity to do it all over again, I would order the 3875 instead of the 2675. Hope this information helps..

[Randall Houghton]

Bruce
I have a 26" woodmaster sander and yes I bought the reversing switch but never used it. I dont think the extension tables are necessary and I've run a fair amount of long material through(12'plus)mine and just used portable roller stands and never had problem. I buy my paper from Woodmaster and they give good service. I'm going to put mine up for sale as I no longer do the type of work I purchased it for. If your interested send me a PM or email. I also have a heavy duty mobile base for it that I'm selling with it. the unit weighs in the 400-500lb. range. I'm within about 30 miles of you.
Regards
Randy

[Scott Goldby]

I have the 38 inch model.Love it!!!. for the small shop you can not beat it. I bought the reversing switch and it has come in handy. You can not go wrong on this purchase.

[James Kuhn]

I'm a bit confused about this reversing switch. If its simply a matter of feeding the plank, having it sanded in both directions, and having it spit back at you, I think I'd be a big fan. Geesh, wish my planer did that.:rolleyes:

[Bruce Page]

Randall, PM sent

[David DeCristoforo]

I'm a bit confused about this reversing switch. If its simply a matter of feeding the plank, having it sanded in both directions, and having it spit back at you, I think I'd be a big fan. Geesh, wish my planer did that.:rolleyes:

The funny thing is that because of the manner in which the abrasive is wrapped around the drum, running it "backwards" thrashes the abrasive! So, even though what you envision is possible, it does not work out very well in "the real world".

[James Kuhn]

Gotcha, thanks.

[Bruce Page]

The funny thing is that because of the manner in which the abrasive is wrapped around the drum, running it "backwards" thrashes the abrasive! So, even though what you envision is possible, it does not work out very well in "the real world".

David, is that true even if you don't adjust the cut?

[Jon Dieterlen]

I have a 37" Woodmaster. I used it in a production environment for 4 or 5 years. I added the extension tables because it had a tendency to snipe the ends of long heavy workpieces such as 48" and longer raised panel doors. The extension tables helped this situation somewhat. Never could see a use for the reversing switch.

I would reccomend using woodmaster paper. They're competitive in their pricing and I think they have slightly better quality paper.

The machine is heavy and well made. Be sure and go thru your grit proggressions. We used 60,80,100,150. The machine did a nice job leveling joints in face frames and doors. I have since moved up to a 2 head widebelt as drumsanders are inherently slow and do not leave quite the same quality finish.

If I were buying a drumsander, woodmaster would be one that I would go for.

Hope this helps, Jon

[David DeCristoforo]

"David, is that true even if you don't adjust the cut?"

Yes. The only time I have found the reversing switch useful is in "backing out" the stock when the machine "chokes" on a "too fat" pass and even then it doesn't work too well. I simply can't see the need for it and if you can save a few bills on the price by forgoing it, you are not really going to be sacrificing anything.

[Bruce Page]

Thanks everyone, for the valuable information.

[ROBERT ELLIS]

Bruce,

I bought mine a number of years ago after reading a review of drum sanders by FW. Woodmaster got their top choice outof the bunch tested. Like some of the others have mentioned I too used mine in a full time environment. It is a machine IMHO that's well worth the money and was a great time saver. Good solid American tooling (I assume it's still made in the USA, mine was) and I think you will be well pleased. Even using it full time I had to change the belt only about every 4 months. I didn't have the reversing switch on mine and it does get cumbersome going from front to back to retrieve the stock. If the reversing switch does what it's designed to do (simply sending it back to you) I could see where it would be handy to have.

Robert

[Ralph Lindberg]

I guess it falls on me to be the iconoclast (again).

I got a 2600 via the death of the father/in-law of some good friends.

Some thoughts:

Noisy
Works and works great
Large (too large)
Got paper from Grizzly
Didn't need infeed/outfeed
Sold it (via eBay)
Did I mention largeI ended up with a Delta X5 (http://www.deltamachinery.com/index.asp?e=136&p=6146) that actually fits in my shop

Me, if I did have room, I would haunt eBay and Craigs List first

[Hal Flynt]

FYI,

I just yesterday recieved a mailer from Woodmaster with 1/2 price sale on the sanders.

[David DeCristoforo]

I guess it falls on me to be the iconoclast (again).

Large (too large)...

Did I mention large[/LIST]I ended up with a Delta X5 (http://www.deltamachinery.com/index.asp?e=136&p=6146) that actually fits in my shop...



Well it's not a small machine but it's kind of a "compared to what" situation. I (and most other drum sander owners) got mine as an option to a wide belt machine which, for an equivalent capacity would be much larger and cost many times more. Compared to the WM sander, the Delta X5 is a toy (no offense intended).

[Nancy Laird]

So, Bruce, do we have a gloat, or what??

Nancy

[Ed Labadie]

Call up Woodmaster and ask if they have a "truckload sale" coming to your area. I had to drive about 30 miles to pick mine (38") up from THEIR truck, not a freight company.
With truckload sale shipping is free and they have really good package prices that include extension tables, extra paper, reversing switch and the mobile base.

I'm completely satsified with my sander.

Ed

[Bruce Page]

So, Bruce, do we have a gloat, or what??

Nancy

Yep, :D :D
I picked it up last night from SMC member Randall Houghton. I need to do some cleanup, give it a bit of lube here & there and do a little electrical upgrading on my sub-panel.
My friends pickup with ½ ton liftgate worked really slick!

Official gloat pictures will be forthcoming!

[john hejmanowski]

Reviving an old thread, I need some advise,,,,

I have the opportunity to buy a Woodmaster 2600 for $500. The machine is in excellent condition, very light use. It's been sitting unused for the last 15 years. I am a newbie hobbyist, making cabinets and stuff for my home.

This 2600 model does not have the conveyor belt, it uses two drive rollers instead. For my kind of use, is this a big deal or not?

And, does anybody have a manual for this machine?

Thanks. John H

[Robin Frierson]

I have never seen one without a conveyor belt. Thats a great price...they are like 3000 now. I once bought an old 26 and had to do quite a bit of work on it,,,,....woodmaster was very helpful to me, they are made right here in the USA so I would give them a call. I have owned the 26 and 38 and would like to get another one. Just need to decide if I have the room this time.

[Bruce Page]

John, I have no experience with the Woodmaster W-2600. Why don't you start a new thread with Woodmaster 2600 in the title and maybe someone will chime in. Doing a quick search, there is al least one forum member that has one.
That said, test it out and see if it does as you would expect. If it is built anything like my 2675 it is a well made machine.

Here's an old thread referencing the 2600; http://www.sawmillcreek.org/showthread.php?94623-Woodmaster-W-2600-Question

[Ric Altman]

I ordered a 2675 and wanted to do the shop wiring today am unsure what 30 amp receptacle to install.

[Bruce Page]

I used NEMA L6-30 plug & receptacle on mine.

[Ric Altman]

I used NEMA L6-30 plug & receptacle on mine.Apparently mine is coming with a cord and plug already installed. Sounds like yours needed to be wired.

[Bruce Page]

Yeah, I bought my 2675 used and put a longer, heavier gage wire on it.

[Ric Altman]

Thanks, I guess it will wait.

[Bruce Page]

Give Woodmaster a call. They're good people to deal with.

[Dave Power]

I guess it falls on me to be the iconoclast (again).

I got a 2600 via the death of the father/in-law of some good friends.

Some thoughts:

Noisy
Works and works great
Large (too large)
Got paper from Grizzly
Didn't need infeed/outfeed
Sold it (via eBay)
Did I mention largeI ended up with a Delta X5 (http://www.deltamachinery.com/index.asp?e=136&p=6146) that actually fits in my shop

Me, if I did have room, I would haunt eBay and Craigs List first

If your 2600 is “noisy”….something is wrong. It’s like a feather dropping onto a pond compared to a planer.