Randy Graham
06-14-2007, 5:52 PM
Hello folks. Newbie here. I am finally getting my shop updated and retooled and have just received a new 20" planer from Grizzly.
The planer has a dust port that measures to be a bit larger than 5" OD. I am hooking up to the 50-760 DC which has very short short run of 4" flex hose.
Any suggestions on the best way to hook the two together from someone who has these two machines would be appreciated.
Thanks
Randy
The planer has a dust port that measures to be a bit larger than 5" OD. I am hooking up to the 50-760 DC which has very short short run of 4" flex hose.
Any suggestions on the best way to hook the two together from someone who has these two machines would be appreciated.
Thanks
Randy