Benjamin Dahl
06-13-2007, 2:03 PM
I am getting ready to turn a shallow plate/platter and figure a glue block is the best way to mount the base to my chuck since there is not much depth for a tenon. (if you have other methods you prefer, please let me know). this is green wood and I am planning on using thick-set CA but wanted to know if I should be using something else. my last glue block failed, though that was probably due to a heavy catch and some punky wood. in any case I am a little bit weary since then and would like some feedback.
Thanks,
Ben
Thanks,
Ben