View Full Version : Another Shaper Question
Dick Sylvan
06-04-2007, 11:38 AM
Is it possible/safe to use a sleeve or bushing on a 30mm spindle to increase the spindle size to 1-1/4"? If so, then it would be possible to use both American and European made shaper cutters.
John Renzetti
06-04-2007, 12:10 PM
hi Dick, Sure no problem, I've used them on my 30mm spindle with some 1 1/4" bore cutters that I have. These bushings are available from several companies-Freud Industrial and Guhdo are two that I know of.
take care,
John
Kyle Kraft
06-04-2007, 12:21 PM
Sounds like a fun machine shop project, as long as you maintain perfect concentricity.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.