Jeff Cord
06-04-2007, 12:18 AM
What is the best way to do this?
I have installed some cabinets that I pre-finished and now need to install some moulding (to hide the fact that my walls are not straight and my scribe and jig-saw skill is not perfected :D).
I'm planning on using a 3/8" quarter-round (just big enough to hide the gaps) but question how to attach it.
Alternatives seem to be:
1) some type of glue/epoxy, or
2) pin-nails (don't own one but could be convinced that I "need" one ;)).
If the recommendation is 1 then what should I use?
If the recommendation is 2 is there a risk of splitting the moulding and shouldn't the pins be holding a glued moulding anyways?
thanks,
Jeff
I have installed some cabinets that I pre-finished and now need to install some moulding (to hide the fact that my walls are not straight and my scribe and jig-saw skill is not perfected :D).
I'm planning on using a 3/8" quarter-round (just big enough to hide the gaps) but question how to attach it.
Alternatives seem to be:
1) some type of glue/epoxy, or
2) pin-nails (don't own one but could be convinced that I "need" one ;)).
If the recommendation is 1 then what should I use?
If the recommendation is 2 is there a risk of splitting the moulding and shouldn't the pins be holding a glued moulding anyways?
thanks,
Jeff