Pool table build - Video, Part 4

[John Nixon]

Greetings all.

I finally released the next installment in the pool table video series.

This video focuses on a particular challenge I had with the design. I needed to allow some way for the legs to be shimmed to level the table, but without the unsightly look that the legs are floating off the floor. Take a look at the latest video to see how I solved this design challenge.

As always, please let me know what you think.

Follow this link to view the new video:
http://www.eaglelakewoodworking.com/index.htm?PTBP4.htm

Thanks,
John Nixon

[John Nixon]

For those of you that may have watched parts 1 - 4 of the video series on the pool table build, let me ask your opinion -

Each part is about 10 minutes each and so far I've covered:
Part 1.) Lock Miter Bit to build a hollow column
Part 2.) Edge band bit, lamination, pattern routing
Part 3.) Router table mortising for loose tenon joinery
Part 4.) Veneering

Here's the question - Do you think the series is moving too slowly? I am trying to get a feel for the level of detail that viewers enjoy. I suppose that may depend on the viewer's skill level.

Any feedback would be appreciated.

The other videos in the series can be found here:
http://www.eaglelakewoodworking.com/index.htm?pooltable.htm

Thanks,
John Nixon