View Full Version : Table & Chairs
Greg Scott
01-08-2004, 9:15 AM
This is the table and chair set that I made for our grandaughter for Christmas. The design of the spindles closely matches the Rockler 3 in 1 crib/daybed/fullbed that was made for her when she was born.
Thanks for looking,
Greg
John Preston
01-08-2004, 9:38 AM
Much better than what I did, I chickened out and bought chairs.
Did you M&T everything? or do the chairs have screws in them? Round or square M&T?
Those should be around for your great grandchildren too.
Greg Scott
01-08-2004, 9:52 AM
John,
All mortise and tenon. Built Pat Warners mortising jig to help with the mortises it worked great.
Thanks,
Greg
Byron Trantham
01-08-2004, 10:15 AM
I have a two year old granddaughter who would love that set. I built that same crib for my grandson. I modified the slats but still used M&T on all joints, all 284 of them! :(
Tyler Howell
01-08-2004, 10:42 AM
Very Nice.
TJH
Lee Schierer
01-08-2004, 10:46 AM
Great looking table and chairs. I'm sure many cups of tea wil be served from that table. Hopefully Grandpa or Grandma can fit the chairs too.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.