Table & Chairs

[Greg Scott]

This is the table and chair set that I made for our grandaughter for Christmas. The design of the spindles closely matches the Rockler 3 in 1 crib/daybed/fullbed that was made for her when she was born.
Thanks for looking,
Greg

[John Preston]

Much better than what I did, I chickened out and bought chairs.

Did you M&T everything? or do the chairs have screws in them? Round or square M&T?

Those should be around for your great grandchildren too.

[Greg Scott]

John,
All mortise and tenon. Built Pat Warners mortising jig to help with the mortises it worked great.
Thanks,
Greg

[Byron Trantham]

I have a two year old granddaughter who would love that set. I built that same crib for my grandson. I modified the slats but still used M&T on all joints, all 284 of them! :(

[Tyler Howell]

Very Nice.

TJH

[Lee Schierer]

Great looking table and chairs. I'm sure many cups of tea wil be served from that table. Hopefully Grandpa or Grandma can fit the chairs too.