Alan Case
06-02-2007, 10:55 PM
Hi.
I have a favour to ask.
Could someone who has an Epilog Helix laser please tell me
a) the height of the centre of the exhaust duct from the floor level
b) the distance of the centre of the exhaust duct from the left hand side of the machine. (as viewed from front)
c) How far the exhaust protudes from the back of the machine. ie depth is stated as 737mm (29") Does this take into account the exhaust spigot, or is the exhaust spigot recessed and finishes inside the 737mm dimension.
Regards Alan Case
I have a favour to ask.
Could someone who has an Epilog Helix laser please tell me
a) the height of the centre of the exhaust duct from the floor level
b) the distance of the centre of the exhaust duct from the left hand side of the machine. (as viewed from front)
c) How far the exhaust protudes from the back of the machine. ie depth is stated as 737mm (29") Does this take into account the exhaust spigot, or is the exhaust spigot recessed and finishes inside the 737mm dimension.
Regards Alan Case