Byron Trantham
01-07-2004, 3:58 PM
Well Dave Avery I received my vac today. The first thing I did was see if the hose end would fit into the DeWalt biscuit cutter - it did!
I have been working on an adapter to connect my Bosh ROS. I'm just about there. I needed to get the hose before I drilled a hole in the adapter. Looks like everything is going to work. I will pics once I get it connected.
Boy this thing is quiet. Bye-Bye Sears. Fortunately when I wired my shop I used 12/2 and 20 amp outlets. The Festool plugged right in, no adapter needed.
Here's a couple pics of the unit and the DeWalt adapter plugged into the hose.
I have been working on an adapter to connect my Bosh ROS. I'm just about there. I needed to get the hose before I drilled a hole in the adapter. Looks like everything is going to work. I will pics once I get it connected.
Boy this thing is quiet. Bye-Bye Sears. Fortunately when I wired my shop I used 12/2 and 20 amp outlets. The Festool plugged right in, no adapter needed.
Here's a couple pics of the unit and the DeWalt adapter plugged into the hose.