View Full Version : Gluing MDF to BB ply - Router Top
Matt Lentzner
05-10-2007, 2:33 PM
I'm making a router table top I wanted to make it with a sandwich of two pieces of MDF with 1/2" BB ply in the middle for increased stiffness and screw holding. I was just going to use plain old yellow glue. Is contact cement a better choice?
Thanks in advance,
Matt
glenn bradley
05-10-2007, 2:45 PM
I have a few fences and jig plates that are one piece of 3/4 MDF with 1/2 bb ply laminated with TB II. Only one problem in 2 years; a mitergauge fence bowed a bit but I suspect storage method as other units have stayed true. No sign of lamination failure and these are moved and banged about more than your RT will be.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.