Paul Wingert
05-06-2007, 11:40 AM
I need a little help wiring my clearvue motor. Please see attached picture
I assume the ground wire goes to the green screw .
I assume one of the hot 240 wires connects to wire #3 (boxed in green)
However, I have two other wires to deal with. Did wires #1 and #2 get seperated? Is it a simple matter of just reconnecting them and hooking the other 220 V hot wire to them? Or is that wrong?
Also, just out of curiousity, what is that black cylinder that says "Mexico" on it (bottom of photo, has two wires coming out)?
Thanks for your help.
I assume the ground wire goes to the green screw .
I assume one of the hot 240 wires connects to wire #3 (boxed in green)
However, I have two other wires to deal with. Did wires #1 and #2 get seperated? Is it a simple matter of just reconnecting them and hooking the other 220 V hot wire to them? Or is that wrong?
Also, just out of curiousity, what is that black cylinder that says "Mexico" on it (bottom of photo, has two wires coming out)?
Thanks for your help.