Rob Bosworth
05-02-2007, 1:26 PM
Has anyone ever done an alignment or power check on a Gravograph LS 900 laser engraving system? I have a 2005 LS 900 - 40 watt system in my shop. It is having some problems. I have never worked on a Gravograph laser system before. I would like to start trouble shooting the system by checking the output power of the laser, then to make sure we have it aligned.
Does anyone know the proper procedures to fire the laser. I have gotten to the three second screen, clicked on alignment, set the power, then jogged the head, but I have not been able to figure out how to fire the laser from the control panel. Hopefully, I can do the rest.
Robert H. Bosworth
ACCESS Business Solutions, Inc.
Hudson, WI. 54016
www.usedlasers.com
roberth@usedlasers.com
(715) 386-8021
Does anyone know the proper procedures to fire the laser. I have gotten to the three second screen, clicked on alignment, set the power, then jogged the head, but I have not been able to figure out how to fire the laser from the control panel. Hopefully, I can do the rest.
Robert H. Bosworth
ACCESS Business Solutions, Inc.
Hudson, WI. 54016
www.usedlasers.com
roberth@usedlasers.com
(715) 386-8021