peter slamp
04-29-2007, 9:36 PM
http://i3.photobucket.com/albums/y86/pslamp32/SBdone3web.jpg
http://i3.photobucket.com/albums/y86/pslamp32/SBdone1web.jpg
http://i3.photobucket.com/albums/y86/pslamp32/SBdone2web.jpg
I made the framed doors a bit too small because i thought I'd have to have a lot of room for wood movement. I've since found that I don't need this much space so I've built new doors which I'll install when the new gla$$ arrives.
The carcasse, frames, breadboards and two of the drawers (experimenting) used dominoes. GREAT tool. The wood is Sapele, the legs mild steel that I fabricated. I mounted halogen lights in the bottom doors. The finish is dewaxed shellac and wipe on poly (3 coats) for a satin finish for the body. Dewaxed shellac topcoated with 3 coats of Waterlox gloss for the table top. Thanks for looking! :)
http://i3.photobucket.com/albums/y86/pslamp32/SBdone1web.jpg
http://i3.photobucket.com/albums/y86/pslamp32/SBdone2web.jpg
I made the framed doors a bit too small because i thought I'd have to have a lot of room for wood movement. I've since found that I don't need this much space so I've built new doors which I'll install when the new gla$$ arrives.
The carcasse, frames, breadboards and two of the drawers (experimenting) used dominoes. GREAT tool. The wood is Sapele, the legs mild steel that I fabricated. I mounted halogen lights in the bottom doors. The finish is dewaxed shellac and wipe on poly (3 coats) for a satin finish for the body. Dewaxed shellac topcoated with 3 coats of Waterlox gloss for the table top. Thanks for looking! :)