Mark Pruitt
04-29-2007, 5:10 PM
I desparately needed this! I've never been much for organizing, but I was getting to the point where I was going to damage my tools if I didn't come up with a storage system.
The tool box came from the borg; it was $50 which was a great deal for my purposes. It has enough space for all my turning tools plus chucks, jaw sets, etc.
I built the two drawer cabinet in a weekend. It has enough space for my Beall system and for future additions. Since my 3520 is not against a wall, I needed something that could sit in the middle of the shop, so I put it on rollers.
Maybe someone can get an idea from this.
63579
The tool box came from the borg; it was $50 which was a great deal for my purposes. It has enough space for all my turning tools plus chucks, jaw sets, etc.
I built the two drawer cabinet in a weekend. It has enough space for my Beall system and for future additions. Since my 3520 is not against a wall, I needed something that could sit in the middle of the shop, so I put it on rollers.
Maybe someone can get an idea from this.
63579