Jeff Kerr
04-28-2007, 8:30 AM
Morning,
I am ready to start on some drawer boxes for my SCMS station that I completed here. http://www.sawmillcreek.org/showpost.php?p=558831&postcount=1
I plan on using some ply that I have in stock already. Nothing fancy as they will be behind the cabinet doors. A couple of deep well boxes to hold tools and such. I think I will use pocket screws for the boxes. I do have a dovetail jig but have never used it. I wouldn't mind starting here but I am not sure of the learning curve and I would like to finish these quick.
If you have some pics I would love to see them. Also if you can show how you attached the draw glides to the cab side would be great. I am using epoxy coated glides. (Full extesion glides were a little to much for the budget for this project).
I am ready to start on some drawer boxes for my SCMS station that I completed here. http://www.sawmillcreek.org/showpost.php?p=558831&postcount=1
I plan on using some ply that I have in stock already. Nothing fancy as they will be behind the cabinet doors. A couple of deep well boxes to hold tools and such. I think I will use pocket screws for the boxes. I do have a dovetail jig but have never used it. I wouldn't mind starting here but I am not sure of the learning curve and I would like to finish these quick.
If you have some pics I would love to see them. Also if you can show how you attached the draw glides to the cab side would be great. I am using epoxy coated glides. (Full extesion glides were a little to much for the budget for this project).