Tersa Home Page?

[Brian Gumpper]

I'm trying to figure out if I can get a Byrd head in my MM CU300 but can't seem to locate the Tersa website. I figured I would see if they even make different 12" heads or if all 12" MM machines would use the same head.

[Rick Lizek]

Lots of manufacturers don't deal direct. Go through wwwwoodtechtooling.com Good professional company to deal with.

[John Renzetti]

Hi , If you want to put a Byrd Shellix head in your MM you should contact Byrd Tool directly to see if they have a match 800-441-2973. You're probably looking at about $1300. They do sell directly. Tersa is the insert cutterhead system found in a lot of jointers and planers brought in from Europe. That's probably what you have on your MM now.
take care,
John

[Brian Gumpper]

Thanks guys, I wasn't very clear.

My machine has a Tersa now. I am a Byrd dealer and have the full machine list but the CU300 is not on it.

I did PM Sam and he was kind enough to respond that the 12" head in the CU300 is the same as the FS30 which is on the Byrd list.