James Meagher
04-22-2007, 9:18 PM
Hi all,
Need some real help here. about 6 months ago I had this problem the the homing postion when I set the laser to home it would go there and start hitting the side of the laser against the motor, then it stopped until about a month ago and they sent me a new cpu for the laser and new motor and flex cables also flex cable boards changed out everything still the same problem. so the sent me a board for the motor I just replaced and it seemed to work only for about 10 minutes and bang things are doing the same again. It has been over 6 months now and I tihnk I ran the machine maybe 2 hours, Don't you think it is time for the company to take the machine back and give my money back .
Let me know what you think and what to do next
Pissed off laser user
Need some real help here. about 6 months ago I had this problem the the homing postion when I set the laser to home it would go there and start hitting the side of the laser against the motor, then it stopped until about a month ago and they sent me a new cpu for the laser and new motor and flex cables also flex cable boards changed out everything still the same problem. so the sent me a board for the motor I just replaced and it seemed to work only for about 10 minutes and bang things are doing the same again. It has been over 6 months now and I tihnk I ran the machine maybe 2 hours, Don't you think it is time for the company to take the machine back and give my money back .
Let me know what you think and what to do next
Pissed off laser user