View Full Version : Building Garage Storage Cabinets?
Gary Warren
04-18-2007, 10:05 AM
I have a 3 car garage with the back portion of the slab being elevated 3 - 4" above the car parking area height and extends towards the front of the garage almost 4' from the back studded wall. In the past, I have put up standard shelving from the big box stores but I find this is just so junky I want to construct a stick built frame to tie to the studs and rafters and then cover with plywood or melamine facing. My question is since I have never built this type of frame or shelving, I would appreciate any advice on how best to accomplish this. I plan to run this cabinetry the entire length of the back wall. I think 2" X 4" construction would work best but not sure and also I am not sure what I should use for internal shelving. Any suggestions or links to construction designs would be appreciated.
frank shic
04-18-2007, 12:02 PM
gary, i'm currently in the process of redoing my garage layout to facilitate better work flow. i built 14 base cabinets to take advantage of the space and i'll post pictures later on tonight when i get home.
Dick Sylvan
04-18-2007, 12:28 PM
Wood Magazine has done a number of features in their magazines, as well as special issues on this subject. You can order back issues and plans at their website: www.woodmagazine.com (http://www.woodmagazine.com) .
Dave Falkenstein
04-18-2007, 1:56 PM
Before you commit yourself to building garage cabinets, check out the kit cabinets available from Home Depot or Lowes. I have installed lots of these systems, and I cannot build melamine cabinets for the price of buying the kits. I just finished a job for a client. I bought, delivered, assembled and installed 15 linear feet of cabinets that are 30" wide X 20" deep X 72" high. The material cost was about $600 at Home Depot. My total labor time was 9 hours.
Brian Penning
04-18-2007, 2:26 PM
Agree with dave. Bought my cabinets at one of the Borgs up here for $96. complete with hardware. Even had room for a french cleat on the back.
They're on the upper left side...
http://i47.photobucket.com/albums/f193/Bri68/Miscilaneous/IMG_2607.jpg?t=1176920734
Jason White
04-18-2007, 3:57 PM
Check out the plans for the "garage workshop" at www.newyankee.com (http://www.newyankee.com). The upper cabinets in those plans are very easy to build and hang.
TP
I have a 3 car garage with the back portion of the slab being elevated 3 - 4" above the car parking area height and extends towards the front of the garage almost 4' from the back studded wall. In the past, I have put up standard shelving from the big box stores but I find this is just so junky I want to construct a stick built frame to tie to the studs and rafters and then cover with plywood or melamine facing. My question is since I have never built this type of frame or shelving, I would appreciate any advice on how best to accomplish this. I plan to run this cabinetry the entire length of the back wall. I think 2" X 4" construction would work best but not sure and also I am not sure what I should use for internal shelving. Any suggestions or links to construction designs would be appreciated.
frank shic
04-18-2007, 9:57 PM
it's true that buying the RTA mill's pride cabinets at home depot is a LOT FASTER and most likely MUCH CHEAPER than making them yourself. nevertheless, i figured i needed some practice and i really wanted to try out metaboxes to speed up production time. slab doors are actually MUCH HARDER than you may think. cutting them chip-free is a minor challenge compared to edgebanding all four sides. after edgebanding one door, i gave up and figured i'd do it some other time in the distant future.
it took me approximately four five-six hours days to cut and assemble the cabinets. i'm still working on the installation as you may have surmised. major bummer is i cut the last remaining sheet i had exactly in half with the eurekazone only to realize that i want more overhang! guess i'll just have to recycle the melamine for some mobile outfeed/garage cabinets.
Rob Wright
04-19-2007, 10:18 AM
Gary,
I also went back and forth on to buy or build my shop cabinets. I agree that purchasing the shelves or cabinets from the BORG is cheaper and easier as others have posted previously. Even though cost was a concern, I decided that I somehow needed to justify the thousands of dollars of tools in my garage(shop) to myself and SWIMBO. I picked up the birch "cabinet grade" - or ChiPly as my local wood supplier refers to it - plywood from BORG and used this for the cabinets and shelves. I know that this isn't the best stuff, but having them rip the sheets on their panel saw was a plus. If you use it - remember that there are a lot of voids and sometimes the ply like to de-laminate. Alos, when you do cut it - get it down on the flat becasue it tends to warp - overall not great material but it came out ok. It was only $20 a sheet so I can't complain too much. I picked up a bunch of poplar from the local wood supplier and used it for the face frames and front edges of the shelves to avoid sag. I used pocket screws and glue to put them together along with the face frames, as well a cleat on the back to attach to the studs. I also built a few upper cabinets to attach to the wall above the work bench with a french cleat. I overall spent $300 on ply and poplar to make the face frames. I don't think that I could have gotten all of the stuff I made for that cost from the BORG in the pre-cut and ready to assemble Melamine units. It was a great exercise in how to built cabinets and it got me off of the couch for a week or so! Good luck with your choice and have fun if you do decide to build
Joe Trotter
04-19-2007, 2:07 PM
I bought these from H Depot. They were easy to assemble, and hang. I wanted to make them but did not have the time.
http://bigbikeriders.com/photopost/data/500/5629after.JPG
Carroll Courtney
04-19-2007, 8:33 PM
How about some pic's and alittle info on the chair in the background?Looks very nice.
Gary Keedwell
04-19-2007, 9:30 PM
Before you commit yourself to building garage cabinets, check out the kit cabinets available from Home Depot or Lowes. I have installed lots of these systems, and I cannot build melamine cabinets for the price of buying the kits. I just finished a job for a client. I bought, delivered, assembled and installed 15 linear feet of cabinets that are 30" wide X 20" deep X 72" high. The material cost was about $600 at Home Depot. My total labor time was 9 hours.
I'm with Dave on this one.... I put 3 big ones in my new garage...LOML loves them.
Gary K.;)
"Michael Hinkel"
04-19-2007, 9:56 PM
I bought about about 12' of upper cabinets, 7' of lower cabinets and one 2'x2'x7' for about 300$ at the "Habitat for Humanity" resale store"
tom coleman
04-20-2007, 3:18 AM
I have the same 4" slab to contend with and I have existing plumbing on the rear wall as well. I am building a false wall using 2x6 studs and plywood sheathing to give myself a clean surface on a new wall. I am having the slab removed ($300 price quote and worth it IMHO)
I will build a long horizontal work surface the length of the back wall at a height of about 40" and use this for miter saw, drill press and router table.My table saw, variable thickness planer and 2 Sears rollaway storage cabinets will nest under this work surface.
I plan on building 15" cabinets to hang high on the back wall so they won't interfere with my work area. I have 10' ceilings in my garage. This approach works for me, you could build base cabinets for extra storage beneath the miter saw horizontal work surface if you prefer
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.