View Full Version : Engraving supplies
Dennis Christensen
04-09-2007, 12:54 PM
Does anyone know where I could find something like this exept with nothing on it, including the dice. It could be any material, like wood, marble, or acrylic. I have a customer that would like different words on each side of the dice. Thanks! Dennis C.
Dave Jones
04-09-2007, 1:35 PM
Generically those are known as "Decision Dice". I don't know who wholesales them, but there are a lot of variations on the web.
You could also buy wood cubes from places like these:
http://www.craftparts.com/mall/Blocks.asp
http://www.barclaywoods.com/craft_parts.htm
Or maybe a nearby craft shop.
Ed Maloney
04-09-2007, 6:49 PM
Sounds like a lot of cycle time to me. You would have to engrave the same piece 6 times.
Guy Hilliard
04-09-2007, 7:29 PM
Or you could engrave and cut a 1/8" plywood box in 1 cycle.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.