Michael Lutz
04-05-2007, 11:56 PM
In February I went to an auction of a local tool store that went belly up and won a few bids. All the merchandise was for new items most in their original packaging. For $33 I got the T track, t-track accessories, and the plastic T-molding. For $44 I got all the microplane items (25 in all). For around $300 I got the fein Turbo III and the accessory kit. I also won some finish and brad nails for $44, but my finish nailer can't use the 3 boxes of 1" nails. I waited to post this until I had pictures, since if there are no pictures then it didn't happen, right!:D
The T-track is all for use with 3/8" bolts, but all the T-bolts are for use with 1/4" track, go figure. The lots of stuff were crazy. A lot of 71 assorted Freud router bits went for $450. Many of the power tools went for 80% of what you could buy it on Amazon for, some even went higher like 10 to 20% higher.
Thanks for sharing my gloat,
Mike
PS if anyone has use for plastic T-molding send me a PM.
The T-track is all for use with 3/8" bolts, but all the T-bolts are for use with 1/4" track, go figure. The lots of stuff were crazy. A lot of 71 assorted Freud router bits went for $450. Many of the power tools went for 80% of what you could buy it on Amazon for, some even went higher like 10 to 20% higher.
Thanks for sharing my gloat,
Mike
PS if anyone has use for plastic T-molding send me a PM.