View Full Version : 21 gauge nailer
Mike Newell
04-05-2007, 5:37 PM
Just wondering if anyone has used the EZ-Fasten 21 gauge pin & brad nailer from Woodcraft? Do you like it?
Thanks Mike
Larry Rasmussen
04-05-2007, 7:50 PM
I thought 21 gauge might be a kind of good in between light size. Ordered a nailer and compressor combo kit. Wouldn't sink anything dependably, hardwood, softwood, even some of the composite trim. I ended up with a Grolsh (that's gotta be wrong) 23 gauge I've had for 6-8 months, never misses. The Woodcraft was unusable.
Larry
glenn bradley
04-05-2007, 8:12 PM
Just to show there are two sides to every coin; I've had mine a couple of years. It's been great. No problems with hard or soft woods. Depth adjustment works great. Confused now?
P.s. Woodcraft has it on sale for $69 now and again.
Michael Schwartz
04-05-2007, 10:10 PM
Pros
Good Magazine
Shoots both pins and brads
Drives fasteners consistently
Cons
Depth Adjustment is a pain to set but works fine.
No Contact Safty or double trigger
Leaks air near max PSI
Good gun to have alongside a name brand 23 gauge gun.
Mike Newell
04-06-2007, 4:01 PM
Thanx everyone. Maybe I'll wait till it goes on sale again to give it a try.
Mike
Derrell W Sloan
04-06-2007, 11:02 PM
I just got a HF sales add today. They have a 23g pin nailer on sale for 16.99. I have one and so far it has worked just fine.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.