21 gauge nailer

[Mike Newell]

Just wondering if anyone has used the EZ-Fasten 21 gauge pin & brad nailer from Woodcraft? Do you like it?

Thanks Mike

[Larry Rasmussen]

I thought 21 gauge might be a kind of good in between light size. Ordered a nailer and compressor combo kit. Wouldn't sink anything dependably, hardwood, softwood, even some of the composite trim. I ended up with a Grolsh (that's gotta be wrong) 23 gauge I've had for 6-8 months, never misses. The Woodcraft was unusable.

Larry

[glenn bradley]

Just to show there are two sides to every coin; I've had mine a couple of years. It's been great. No problems with hard or soft woods. Depth adjustment works great. Confused now?

P.s. Woodcraft has it on sale for $69 now and again.

[Michael Schwartz]

Pros

Good Magazine
Shoots both pins and brads
Drives fasteners consistently

Cons

Depth Adjustment is a pain to set but works fine.
No Contact Safty or double trigger
Leaks air near max PSI

Good gun to have alongside a name brand 23 gauge gun.

[Mike Newell]

Thanx everyone. Maybe I'll wait till it goes on sale again to give it a try.

Mike

[Derrell W Sloan]

I just got a HF sales add today. They have a 23g pin nailer on sale for 16.99. I have one and so far it has worked just fine.