Joe Chritz
04-04-2007, 6:21 PM
I feel that it is important to have positives mentioned as well as negatives.
That being I contacted MLCS for a failed rub collar on a shaper cutter for rails/stiles. The shield had come off exposing the bearings to dust.
18 hours later I had a response and confirmation of a new bearing being shipped.
I have purchased things from them before and will continue to do so.
Good for them
Joe
That being I contacted MLCS for a failed rub collar on a shaper cutter for rails/stiles. The shield had come off exposing the bearings to dust.
18 hours later I had a response and confirmation of a new bearing being shipped.
I have purchased things from them before and will continue to do so.
Good for them
Joe