Source for chip collection bags

[Jim Pzinski]

Any source suggestions for replacement chip collection bags for a Delta 50-760 DC? Delta Service Centers want $14.40 for one, which seems a bit steep to me.

[Alan Greene]

I have been looking for the bags, without success (not counting Delta). I have used the bags from Wynn Environmental and Amazon's"JDS Company 16004 Dust-Force Plastic Bags - 5 Pack
" With both of these bags you have to fold over the top as they are to big. They do work though.

[Jim DeLaney]

Check out Penn State. Their poly bags are very sturdy - 5 mil? - and aren't too pricey.

[Bob Hovde]

Any source suggestions for replacement chip collection bags for a Delta 50-760 DC? Delta Service Centers want $14.40 for one, which seems a bit steep to me.

Shopsmith makes good bags that are fairly cheap.

Bob

[Ron Blaise]

Reasonable, and very good quality bags.

[Scott Long]

Try this out,

http://www.grizzly.com/outlet/category.aspx?key=180020

I don't know what the shipping will cost you, but you can give it a try.

Or try http://wilkemachinery.com

I hope this helps

[Kevin Scott]

I have been using contractor garbage bags (3mil, 42 gallon) that I bought from Home Depot as the chip bags for my Delta dust collector. I have been extremely happy with the results. I believe they were about $15 for a box of 32 bags.

[Cary Falk]

I got 5 for $19.99 at Woodcraft. The were 20" I used on my Jet 1100A

[Bart Leetch]

I use either heavy duty or extra heavy duty 30 gallon trash bags. I have the Skirt that goes from the bag rim to a trash can from Wood workers Supply. But I use a trash bag then over the bag the skirt from the rim down to the trash can. This protects the bag. If I just use the skirt it comes down over the outside the garbage can & the chips collect between the inside of the skirt & the outside of the can & when I unfasten the skirt all these chips fall to the floor & on the lower part of the machine. Yes all this takes a little more time to set up but it works good.