Paul Stroik
03-26-2007, 6:39 PM
I am redoing my stairwell. They had carpeting, which I removed and the wife wants to paint everything. So I am replacing the particle board risers with 3/4 inch pine. Sanding the threads and reusing them.
What type of nail should I use on these. I have thought of using finishing screws, I believe is what they are called. But I do have plenty of finishing nails. 11/2"-2". Will these provide enough grip or will they eventually work loose from the constant use under heavy foot traffic?
Paul
What type of nail should I use on these. I have thought of using finishing screws, I believe is what they are called. But I do have plenty of finishing nails. 11/2"-2". Will these provide enough grip or will they eventually work loose from the constant use under heavy foot traffic?
Paul