Nissim Avrahami
03-26-2007, 4:48 PM
Good day
The title is glass table but, actually, I'm just changing the top according to the last order of my wife (ok, I also love to do it)...
I built the table some 8 years ago while living in Japan.
It's made of Luan, 23" x 23" and stained 5 years later.
.
The top (frame) is Oak 1¼" thick 4" wide and 25" x 25", I'm using the same stain and hope that it will fit somehow to the stained Laun.
Now, I'm painting the frame but, because of the weather the drying time between the layers is very long (so was the gluing and staining).
The design is that a plywood will sit inside the frame, and on top of the plywood, ¼" glass.
Between the glass and the plywood will come "something" that I cannot tell you (by order) and you shall have to wait and see the finished top.
Regards
niki
The title is glass table but, actually, I'm just changing the top according to the last order of my wife (ok, I also love to do it)...
I built the table some 8 years ago while living in Japan.
It's made of Luan, 23" x 23" and stained 5 years later.
.
The top (frame) is Oak 1¼" thick 4" wide and 25" x 25", I'm using the same stain and hope that it will fit somehow to the stained Laun.
Now, I'm painting the frame but, because of the weather the drying time between the layers is very long (so was the gluing and staining).
The design is that a plywood will sit inside the frame, and on top of the plywood, ¼" glass.
Between the glass and the plywood will come "something" that I cannot tell you (by order) and you shall have to wait and see the finished top.
Regards
niki