Mike Seals
03-24-2007, 9:46 PM
I'm rebuilding the pond pump house that hurricane Rita destroyed. To go with the style of the house, it needs to have a rustic look. I'm looking at using some cedar fence pickets and cuting them to look like lap siding. I could take a venture down to the local HD and measure the cut angles for siding, but I'm sure they would not match. Any clues as to how to make this wood lap.
I have a good band saw, jointer, shaper, table saw etc, etc, but rather than experiment until I got it right, I was hoping some one could give me some clues as to how to cut the boards.
Thanks.
I have a good band saw, jointer, shaper, table saw etc, etc, but rather than experiment until I got it right, I was hoping some one could give me some clues as to how to cut the boards.
Thanks.