Air Hose

[Jim Harsha]

I need to replace the air hose from my compressor to my gun/pot. The run is no more than 20'. I'm using Walcom and Asturo guns. Is 1/4' OK for these guns or should I go with 3/8". Thanks

[Ron Meadows]

I run 3/8" from my compressor to my pot/gun setup. If you do this then you can use 1/4" lines for both your fluid and air lines from the cup to the gun.....much easier to handle with the thinner lines. My fluid/air lines are 20' long and it works wonderfully.


Ron