Matt Lentzner
03-21-2007, 6:21 PM
I really like the idea of using the Board Buddies, especially for sheet good. At least for me, it's difficult to keep the cuts from wandering with the larger pieces. I can use my circular saw with a guide to do some cuts, but I haven't figured out a way to do a center rip on a full sheet with the the TS. (That may be a whole 'nother topic :))
The problem is that I only have a benchtop (Bosch 4000) saw. I was thinking I would build and auxiliary fence out of MDF and attach the BBs to the stock fence.
Or am I smoking dope?
Matt
The problem is that I only have a benchtop (Bosch 4000) saw. I was thinking I would build and auxiliary fence out of MDF and attach the BBs to the stock fence.
Or am I smoking dope?
Matt