Mitchell Andrus
03-19-2007, 9:47 AM
I need to bend and veneer a 6" x 14" piece of 1/4" plywood. In two places, I need to bend a 1.5" radius. Imagine an old radio cabinet....
Are there any commercially available products that will work? This is pretty tight. I've done a bunch of mock-ups via vac bag with some ply with the faces sanded off, so I'm almost there.......
Are there any commercially available products that will work? This is pretty tight. I've done a bunch of mock-ups via vac bag with some ply with the faces sanded off, so I'm almost there.......