Jon Farley
03-17-2007, 7:05 PM
A friend wanted me to make these for a rather involved project he is working on. Any ideas on what you think they are?
For size reference, the two large pieces are about 5 feet long and 2 inches thick. It doesn't show too well on the picture but each long piece has a 'notch' cut on the outboard edge. There are also quite a few holes drilled at precise locations. Answer will be forthcoming.
BTW, they are white oak coated with West System Epoxy.
For size reference, the two large pieces are about 5 feet long and 2 inches thick. It doesn't show too well on the picture but each long piece has a 'notch' cut on the outboard edge. There are also quite a few holes drilled at precise locations. Answer will be forthcoming.
BTW, they are white oak coated with West System Epoxy.