Roy Clarke
03-17-2007, 1:57 PM
I've just bought one of these along with quite a few other bits, and I must be doing something wrong. I get blade marks when ripping 10mm thick beech. It's not much load for the saw, and I tried a few cuts which were nearly perfect. Then I did a few mitre cross cuts then set the saw bacb to 90 deg to do a few more rips. The blade marks this time were as bad as any portable saw. The blade is just through the wood, and is 48 tooth tipped.
I had the saw mounted in the CMS table for this exercise. Can anyone tell me what I'm doing wrong? Does anyone else have this problem? According to the various workshop sites, I should be able to get a near planed finish with this machine.
I had the saw mounted in the CMS table for this exercise. Can anyone tell me what I'm doing wrong? Does anyone else have this problem? According to the various workshop sites, I should be able to get a near planed finish with this machine.