glenn bradley
03-15-2007, 10:08 PM
My CMS ZCI had gotten worn a bit and I'd been meaning to replace it. Need to do up some face frame sticks and decided now was the time.
Grab some 1/4" hardboard; if you're gonna make one, might as well make six:
60346
Double tape the original on for a pattern:
60347
Use a pattern bit to do the final shaping:
60350
Grab some 1/4" hardboard; if you're gonna make one, might as well make six:
60346
Double tape the original on for a pattern:
60347
Use a pattern bit to do the final shaping:
60350