PDA

View Full Version : Engineering Grade Retroreflective Sheeting



Larry Bratton
03-14-2007, 7:40 PM
I was wondering if this material is safe to cut? It is reflective polyester sheeting like one would use to make a street sign. I have cut it with a plotter to make street signs for developments. From the MSDS it does not appear to have any pvc in it. Has anyone done this before or used anything similar in your laser? It looks to be a safe material.
http://www.tapetechnologies.com/reflect_msds.html

Joe Pelonio
03-14-2007, 11:26 PM
I have also cut the reflective by Arlon and 3M after applying to acrylic for reflective letters with no problems after checking the MSDS on them.