View Full Version : HF discounts
Al Killian
03-06-2007, 5:02 PM
Does anyone have a coupon for HF? I am looking at buying there dovetail jig, which is not my first choice. I need a jig and money is really tight, say about $50 bucks. I have treid fleabay, but there are no good deals to be found.
glenn bradley
03-06-2007, 5:17 PM
Till 3/12/07 - - -
Dave Sweeney
03-06-2007, 5:17 PM
I don't have a coupon to pass along but if you print this (http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=34102) and take it to your local HF they will match the price.
EDIT: With glenn's coupon and the printout I linked you to your price is now under $23.00.:cool:
Bruce Benjamin
03-06-2007, 6:45 PM
http://www.ncwoodworker.net/pp/data/500/medium/img003.jpg
Craig D Peltier
03-06-2007, 8:04 PM
Is the HF jig used here by anyone? Wondering if I want to get just to see.
Thanks
I don't have a coupon to pass along but if you print this (http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=34102) and take it to your local HF they will match the price.
EDIT: With glenn's coupon and the printout I linked you to your price is now under $23.00.:cool:
Justin Henry
03-06-2007, 8:17 PM
I've used 4 of the printed 30% off in last 3 days. They scan fine at the register no matter what size I used and they sure don't seem to care if you use one,walk to car and unload and then walk back and repeat it.
Only 6 more days to take advantage of what I bet they never repeat. 30% off had never been seen until this gem showed up:D
Wes Bischel
03-06-2007, 9:45 PM
I've used it for several drawers (poplar as stock). They are for my 5 year old, so they needed to be durable more than beautiful. I need to adjust it a bit more for a tighter fit, but for a first try, not too bad. (yes, I know they are not the best - my issues with set-up, not the jig.) They will never be as nice as fine hand cut dovetails, but the jig works. The drawers have been holding up for a year and a half with no issues.
FWIW,
Wes
Robert Malone
03-08-2007, 7:07 AM
I used the 30% off coupon printed on full page with no problem wednesday.
Craig D Peltier
03-08-2007, 1:54 PM
Thanks, i went yesterday but they didnt have any. Bought a 6" benchtop grinder instead for like 25 after discount.
I've used it for several drawers (poplar as stock). They are for my 5 year old, so they needed to be durable more than beautiful. I need to adjust it a bit more for a tighter fit, but for a first try, not too bad. (yes, I know they are not the best - my issues with set-up, not the jig.) They will never be as nice as fine hand cut dovetails, but the jig works. The drawers have been holding up for a year and a half with no issues.
FWIW,
Wes
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.